Tackleberry
Member
I have several items for sale to fit F430.
All items are either brand new, or have been fitted to the car and removed again.
Prices quoted for each item will include:
1) Shipping within the UK (outside UK will incur additional cost depending on destination etc).
2) PayPal fees.
So no additional cost, the price you see is the price you pay !
Interested parties simply drop me a PM and we'll got from there
Item 1:
Hill Engineering Skid Plates
These are brand spanking new and still sealed in the factory wrapper.
Price £100
Item 2:
Hill Engineering Exhaust Trims
These are in perfect unmarked condition with original packaging/box, and supplied Allen Key.
They have been offered up to the car, then removed and not used (zero miles).
Price £150
Item 3:
Kline Inconel Button
This an Exhaust Bypass Valve Controller.
As supplied there was little in the way of instruction, and actually not usable for the car it was intended for (only had facility to operate one valve !).
So I carried out some modifications so that it could be used on the F430, or indeed any Ferrari using two Bypass Valve Solenoids.
Modifications include:
Second wiring harness (now one for each side).
Fully integrated power harness. No guessing where to find a switched live, just plug it in.
Prepared earthing lead.
Fully sealed and weather proofed.
Additional fitting instruction written by myself to make installation much clearer.
Operation is by remote control.
There is nicely machined remote switch that inserts into the cars Cigar Lighter.
It is from here it takes it's power thus not requiring any batteries.
You simply push the button to open the valves, or again to return the system to car control.
This setup has been fitted to the car and tested.
Price £200
Item 4:
H&R Lowering Springs
These were fitted to the car under my instruction to the dealer.
However they were a little too low for my liking.
So they were removed again and put back in the box.
They have done zero miles.
Any marks are simply where they have been fitted and then removed again.
The than that they are in perfect condition.
Supplied in the original packaging along with the necessary TUV certification.
Price £300
All items are either brand new, or have been fitted to the car and removed again.
Prices quoted for each item will include:
1) Shipping within the UK (outside UK will incur additional cost depending on destination etc).
2) PayPal fees.
So no additional cost, the price you see is the price you pay !
Interested parties simply drop me a PM and we'll got from there
Item 1:
Hill Engineering Skid Plates
These are brand spanking new and still sealed in the factory wrapper.
Price £100
Item 2:
Hill Engineering Exhaust Trims
These are in perfect unmarked condition with original packaging/box, and supplied Allen Key.
They have been offered up to the car, then removed and not used (zero miles).
Price £150
Item 3:
Kline Inconel Button
This an Exhaust Bypass Valve Controller.
As supplied there was little in the way of instruction, and actually not usable for the car it was intended for (only had facility to operate one valve !).
So I carried out some modifications so that it could be used on the F430, or indeed any Ferrari using two Bypass Valve Solenoids.
Modifications include:
Second wiring harness (now one for each side).
Fully integrated power harness. No guessing where to find a switched live, just plug it in.
Prepared earthing lead.
Fully sealed and weather proofed.
Additional fitting instruction written by myself to make installation much clearer.
Operation is by remote control.
There is nicely machined remote switch that inserts into the cars Cigar Lighter.
It is from here it takes it's power thus not requiring any batteries.
You simply push the button to open the valves, or again to return the system to car control.
This setup has been fitted to the car and tested.
Price £200
Item 4:
H&R Lowering Springs
These were fitted to the car under my instruction to the dealer.
However they were a little too low for my liking.
So they were removed again and put back in the box.
They have done zero miles.
Any marks are simply where they have been fitted and then removed again.
The than that they are in perfect condition.
Supplied in the original packaging along with the necessary TUV certification.
Price £300
