Search results

am seriously looking for a 599 but not sure to buy a GTB or the HGTE version i'm not looking to track the car or anything and would say that comfort is more important than overall performance should i try and find a HGTE model?...they are rare and i'm fussy as to the colour i want?

Anyone interested in buying my set of TiKore titanium wheelbolts for a 355? PM me if interested

Know am not supposed to do this but thought i'd give it a go...before ebay guys in the States get it... For sale: Unused complete Scuderia Rampante Silicone hose set for all 355's The best that you can get With all uprated clamps Around £1000 with shipping and import tax. I will ship for...

I'd like to remove my left hand radiator air scoop...the plastic body piece that sits under the door...part number: 64101210 on my 355 Anyone know what's involved in removing this....i know the sill plate has to come off to reveal some screws but are there any other screws or bolts that have to...

My 355 lights up only the outer halfs of the outside lenses on my 355.... Not the whole red lens when the brakes are used. Is this correct for a UK car?

I've had my 355 filled with Shell Ultra Helix 5W40. I notice lots of small air bubbles on the dipstick when checking hot oil. Anyone seen this with this oil...or any other brand? I've read that this oil does tend to foam badly. I'm concerned... Any thoughts from the engineers out there?

Anyone know anyone in the UK that can reattach the tiny broken wire as seen in the photo? Needs a specialist me thinks.

Anyone know of a European source for a custom fitted carpeted mat for the front boot of a 355? There's a supplier in the USA but do not fancy the shipping hassles to the EU.

.....yup....i need to locate a RH headlamp lifting motor for my 355 New oem ones are a different design. So i'm after one from a car being parted out... Can someone recommend a dealer for me to contact?

anyone attached one of these? What's the best way to fix it to the fuse board lid?:huh:

Is it possible to remove this badge from the left side of a 355 without having to remove the radiator? Am hoping the 2 securing clips are accessible by only removing the inner wheel arch panel. Need to know before taking in for paint. Thanku

Yup Have tried two right hand side headlamp pod motors...a new OEM and the original that has been renovated with new diodes. Both work in as much as the pod goes up and the pod goes down but...... the pod comes up at a slightly slower speed than the left one...looks pretty bad when...

Anyone help with this....F355....M2.7 Had my RH headlamp pod motor renovated by top specialist DK ENGINEERING Did this because it was raising the pod but not lowering After the rebuild...new diodes, etc....the motor when on the work bench works just fine...the spindle rotating clockwise and...

Need to replace my tired water pump in the 355. Has anyone bought the uprated Capristo version? Has a metal impellor attached via a Square recess so it stays put... Can anyone recommend it? Howard

I have a small piece of trim...the door trim vertical strip from a 355 that needs retrimming and matching up to the ivory colour of the rest of the car. Can anyone recommend a great trimmer that will be able to do this... In the photo it is to change the black piece to match the ivory piece.

The owners manual shows clearly that to change the bulbs in the front sidelights you remove the nice screw and the lens cover itself comes free from its housing revealing the bulbs. On my 1995 F355 the lens cover is firmly attached to its housing. You have to pull out the light assembly itself...

.......the 355 engine lid latch ... Black Zinc Yellow passivated?

Can anyone recommend a firm who can get my headlamp pod motor working? It lifts up perfect but will not retract. I have it apart and the internals are pristine. I think a diode may have blown. Need an expert to test the motor's electric function and replace diode(s) if necessary. Thanks

I think it was Terry who found a place that did a great job on his 355 wheels. I think the first time the colour was slightly wrong but the second time they came out great. Was it Wheel Works in Crawley that was used?

.....these 2 larini heatshields...? They just stop the rear bumper aligning nicely with the rear wing as they interfere by about 2mm with the OEM heatshield thats there for the protection of the bumper.